32
Load media
6 Place the print media against the
left side of the multipurpose
feeder, with the print side up and
facing into the multipurpose
feeder.
7 Push the print media forward, but
do not force it.
8 Slide the width guide until it lightly
touches the stack of print media.
Note: Refer to the table on page 25 for the maximum
capacity of various print media in the multipurpose feeder.
Refer to the publications CD for
additional information on loading different
types of media such as letterhead,
transparencies, card stock, and
envelopes.
Stack
height
limiter
To Next Page
Loading...
