When the action button is pressed, the OSD turns to the following page:
The background color can be defined by selecting the color and pressing OK
Default background color is Black
5.2.8 DEINTERLACE
This option allows the user to select the deinterlacing method of Leadshow 3G . Since Leadshow 3G
is a dual processor design, you can define deinterlacing of both the VXP processor chip by Gennum,
and the FLI2300 processor chip by Faroudja. In general, Leadshow 3G will deinterlace standard
definition video source (i.e. NTSC 480i or PAL 576i) using FLI2300, and deinterlace other sources
using VXP. If DCDi by Faroudja is disabled (see Section 5.2.10) all deinterlacing is performed by
Gennum VXP.
For VXP processing chip
Auto: Leadshow 3G will automatically select either motion adaptive deinterlacing or 3:2/2:2
reverse pulldown film deinterlacing
Video: Leadshow 3G will only use motion adaptive deinterlacing
For FLI2300 processing chip
Auto: Leadshow 3G will automatically select the deinterlacing method from one of the below:
DCDi
3:2 reverse pulldown
2:2 reverse pulldown (PAL only)
Video: Leadshow 3G will only use DCDi deinterlacing
39
To Next Page
Loading...