Leyard Leadshow 3G - Troubleshooting

noituloSmelborP
elbacrewopkcehCerutciPoN
 Check power switches
 Ensure that the video cables are connected between the
display device and the Leadshow 3G
 Ensure that the video input source is selected (see Section
5.1.1)
 Ensure that your display is connected to the Primary
Output Port (see Section 5.3.1)
 Ensure that your display supports the current output
resolution; change output resolution if necessary (see
Section 5.3.3)
Remote Control not working  Ensure that there are 3 AAA size batteries in the remote
control and they are inserted the correct way around
 Ensure that the remote backlight is working, otherwise
replace the batteries with a fresh set
 Ensure that the front panel of the Leadshow 3G is not
obstructed by any objects, as the IR remote control
requires ‘line-of-sight’ to function correctly.
yltcerrocdetcennocera
selbacoiduaehttahterusnEdnuoSoN
between the Leadshow 3G and your audio device
 Ensure that you have selected the correct output type for
your audio connections
 Ensure that the audio input is selected (see Section 5.4.1)
Picture is displayed  Check cabling, particularly that the cable providing video
but is unstable sync is connected correctly
 Ensure that your display is connected to the Primary
Output Port (see Section 5.3.1)
 Ensure that the Sync type of Output Port (see Section
5.3.2) is set correctly
 Ensure that the Sync Polarity of Output Port (see Section
7.7) is set correctly
Picture is displayed  Ensure that your display is connected to the Primary
but the color is wrong Output Port (see Section 5.3.1)
 Ensure that the Color Space of the Input Port (see Section
5.1.2 for Component input, and Section 7.1 for HDMI
input) is set correctly
 Ensure that the Color Space of the Output Port (see
Section 5.3.2 for Analog output, and Section 7.7 for HDMI
output) is set correctly
Picture is displayed but it is  Ensure that your display is connected to the Primary
“very washed out” Output Port (see Section 5.3.1)
(or “excessively dark”)  Ensure that the Video Level of the Input Port (see Section
7.1) is set correctly
 Ensure that the Video Level of Output Port (see Section
7.7) is set correctly
8. TROUBLESHOOTING
80
Continued overleaf