Thank you very much for purchasing Leadshow 3G ,the World’s most advanced video processor!
This unit will bring you a breathtaking visual experience by revealing the full potential of your
display devices.
After unpacking Leadshow 3G , please save all packing materials; they may be useful as a safe way
to transport your system. If any part of your system is missing or appears damaged, contact your
dealer immediately.
Before you start, please check that you have all of the following
contents with you:
1. Leadshow 3G Video Processor
2. Backlit Leadshow 3G Remote Control
3. Mains power lead
4. Leadshow 3G Owner’s Guide
5. USB Firmware upgrade thumb disk
6. Rack mounting brackets
If everything is ready, you may now:
1. Connect your Leadshow 3G to your AV devices with reference to Section 3 : Hardware
Installation.
2. Configure Leadshow 3G with reference to Section 4 : Basic Setup and Section 5 :
Leadshow 3G Configuration.
3. Register your Leadshow 3G to enjoy official warranty, technical support, and software
updates from Leyard Electronic Technology Co.,Ltd.
4. Upgrade your Leadshow 3G with the USB Firmware upgrade thumb disk as provided. Also
check the official Leadshow 3G website (http://www.leyard.com) regularly to download
the latest firmware.
Enjoy!
Caution: Make sure you read and follow the instructions of the Leadshow 3G User Guide to
connect the Leadshow 3G to your AV system.
WELCOME
4
To Next Page
Loading...