7.11 DYNAMICVP
TM
Leadshow 3G can perform a set of programmed actions according to the video input format.
For example, output resolution can be changed according to the input video frame rate.
DynamicVP
TM
will take effect only when the DynamicVP Mode is “ON”
Leadshow 3G checks the video format under “ When Input ” one by one. If it matches the
input video format, the action under “Action/Resolution” will be executed or the resolution
will be set as the output resolution
If there is no match, the “Otherwise” will be executed (if it is defined)
Checking will be performed only when the input format or input port has been changed
Press the action button to delete that “rule”
When Input dropdown options:
50Hz
60Hz
NTSC
NTSC Film*
NTSC30 Film*
NTSC Video*
PAL
PAL Film*
PAL Video*
480p
576p
720p50
720p60
1080i50
1080i50 Film*
1080i50 Video*
1080i60
1080i60 Film*
1080i60 Video*
* Available only in firmware version 2.00 or later
77
To Next Page
Loading...