EasyManua.ls Logo

Leyard Leadshow 3G - 4.7.2 48 HZ;72 HZ CADENCE LOCK; 4.7.3 BASIC CALIBRATION

Leyard Leadshow 3G
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMPUTER/NETWORK CONNECTIVITY
These are optional/advanced connections
RS232 DB9 Male Serial connection
Allows Leadshow 3G to be integrated into and controlled by third party control systems.
Infrared In/Out for room-to-room remote control
USB2.0 port 1; USB2.0 port 2
Allows Leadshow 3G to be upgraded using a USB thumb disk and attached external drives for
media storage expansion.
RJ45 Ethernet connection
Allows Leadshow 3G to be connected to a computer network for playing
media files stored on shared folders or network servers, and network access of the internal hard
disk by networked PCs.
IEEE1394 Firewire connections
The Firewire connection is reserved for future use. If possible, activation will be carried out by a
future firmware update. Please check future firmware updates for information.
2.3 REMOTE CONTROL
one remote control for Leadshow 3G functions
2.3.1 MAIN LEADSHOW 3G REMOTE CONTROL
The main Leadshow 3G remote control is equipped with a motion sensor. Backlight automatically
turns on when the remote control is picked up.
18
19
15
16
17
15

Table of Contents