Leyard Leadshow 3G - Output Sync Polarity;Sync Type When in Passthru Mode

7.7.5 OUTPUT SYNC POLARITY/SYNC TYPE WHEN IN PASSTHRU MODE
 Output Horizontal and Vertical sync polarities of HDMI can be defined as:
 Positive
 Negative
 Same as Input
 When Analog output is RGBHV or RGBS, Horizontal and Vertical sync polarities can be defined as:
 Positive
 Negative
 Same as Input
 When Analog output is YPbPr, sync type will be Bi-Level (negative) for standard definition and
Tri-Level (negative-positive) for high definition
When the action button is pressed, the OSD turns to the following page if analog
output is defined as RGBHV or RGBS:
If Analog output is configured as RGBS, the composite sync is simply the
combined signal of H-sync and V-sync. Please adjust the sync polarities of both H-sync
and V-sync accordingly.
Or, turn to the following page if Analog output is defined as YPbPr:
68