noituloSmelborP
Picture is displayed but it is Adjust the Position of Analog Input Adjust if necessary (see
shifted to the right (or left)
Section 5.1.3)
Ensure that the Image Position (see
Section 5.2.6) is set to
the center of your screen (0,0)
When output is analogue RGB, check horizontal sync
polarity is correctly set for your display (See Section 7.7)
Objects in the image appear Ensure that the Screen Shape (see
Section 5.3.4)isset
to be too tall or too wide correctly.
Ensure that the Image Aspect Ratio (see
Section 5.2.4)is
set correctly.
Ensure that the aspect ratio setting of your display device
is 16:9 in the setup menu of all source devices that support
this feature (DVD players, satellite receivers, etc), even if
the screen is not 16:9
81
To Next Page
Loading...