63300855170_002_C8 - 08/2021 - © Leybold
EU Declaration of Conformity
This product has been manufactured under a quality management system certified to ISO 9001:2015
EU Declaration of Conformity
Bonner Strasse 498
D-50968 Koln
Germany
T: +49(0) 221 347 0
documentation@leybold.com
The product specified and listed below
• Turbomolecular Pumps with Integrated Frequency Converter
TURBOVAC a1 a2 a3 i f1 f2
TURBOVAC a1 a2 a3 iX f1 f2
TURBOVAC a1 a2 a3 iC f1 f2
a1 = 850 or 950 or 1350 or 1450,
a2= 10 to 1000,
a3 = 1 to 500 (Indices a2 and a3
optional)
f1 = 100 to 250
f2 = ISO-K or ISO-F or CF
8xxxxxVxxxxy
x = 0 to 9
y = blank or U
a1 = Pumping speed (first Inlet)
a2 = Pumping speed (second Inlet)
a3 = Pumping speed (third Inlet)
f1 = High Vacuum flange
f2 = Flange type
i = Communication electronic Frontend
or Frontend Anybus
iX = Communication electronic Extension box
U = Upside Down
iC / C = Cartridge - Housing for Customer Application
m = Customer-Variants Multi-Inlet
TURBOVAC numeral m i
TURBOVAC numeral m iC
numeral = quad, penta, hexa,
hepta, octa, nona, deca (according
to the number of inlets)
m = 1 to 99
8xxxxxVxxxxy
x = 0 to 9
y = blank or C
Is in conformity with the relevant requirements of European CE legislation:
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were complied with in accordance
with Annex 1 No. 1.5.1 of this directive.
Electromagnetic compatibility (EMC) directive
Class B Emissions, Industrial Immunity
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements