LEYBOLD TURBOVAC i(X) - UK Declaration of Conformity

65300855170_002_C8 - 08/2021 - © Leybold
This product has been manufactured under a quality management system certified to ISO 9001:2015
P20010456A
Declaration of Conformity
Leybold GmbH
Bonner Strasse 498
D-50968 Koln
Germany
Documentation Officer
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
documentation@leybold.com
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Turbomolecular Pumps with Integrated Frequency Converter
Type Designation
Part Numbers
Description
< 3 Inlets
TURBOVAC a1 a2 a3 i f1 f2
TURBOVAC a1 a2 a3 iX f1 f2
TURBOVAC a1 a2 a3 iC f1 f2
a1 = 850 or 950 or 1350 or 1450,
a2=10to 1000,
a3 = 1 to 500 (Indices a2 and a3
optional)
f1 = 100 to 250
f2 = ISO-K or ISO-F or CF
8xxxxxVxxxxy
x= 0 to 9
y = blank or U
a1 = Pumping speed (first Inlet)
a2 = Pumping speed (second Inlet)
a3 = Pumping speed (third Inlet)
f1 = High Vacuum flange
f2 = Flange type
i = Communication electronic Frontend
or Frontend Anybus
iX = Communication electronic Extension box
U = Upside Down
iC / C = Cartridge - Housing for Customer Application
m = Customer-Variants Multi-Inlet
> 3 Inlets
TURBOVAC numeral m i
TURBOVAC numeral m iC
numeral = quad, penta, hexa,
hepta, octa, nona, deca (according
to the number of inlets)
m = 1 to 99
8xxxxxVxxxxy
x= 0 to 9
y = blank or C
The object of the declaration described above is in conformity with relevant statutory requirements:
Supply of Machinery (Safety) Regulations 2008
The objectives of the Electrical Equipment (Safety) Regulations 2016 are governed by Annex 1 1.5.1 of this regulation.
Electromagnetic Compatibility Regulations 2016
Class B Emissions, Basic Industrial Immunity
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Relevant designated standards or technical specifications are as follows:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61010-1:2010/A1:2019
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements