36
INSTALLATION OF OUTDOOR UNIT
0.3m
0.5 m
0.6 m
0.1 m
1 m
For noise reduction
Installation space around each unit
Multiple installation
For good ventilation
INSTALLATION OF OUTDOOR UNIT
The outdoor unit is installed outside to exchange heat with ambient air.
Therefore, it is important to secure proper space around the outdoor unit and care for specific
external conditions. This chapter presents a guide to install the outdoor unit, make a route to
connect with the indoor, and what to do when installed around seaside.
Minimum Operation Space
Following distances around the outdoor unit must be respected under any condition for normal
operation. The distances are only for operation not to be seen as safety zone.
Conditions to be considered when installing the outdoor unit
NOTE
• Please do not block the slits in the exterior panels!
To Next Page
Loading...
Need help?
General