92
ACCESSORIES INSTALLATION
Remote Temperature Sensor
Remote temperature sensor can be installed any place a user wants to detect the temperature.
Installation condition
Role and constraint while installation of remote air temperature sensor is very similar to that of
thermostat.
• Distance between the unit and the remote air temperature sensor should be less than 15 m
due to length of the connection cable of remote air temperature sensor.
5 ft
(1.5 m)
Direct
Sun ray contact area
no
no
no
yes
Connection cable
(less than 15 m)
Remote Air Temperature Sensor
CAUTION
!
• Choose the place where the average temperature can be measured for the unit operates.
• Avoid direct sunlight.
• Choose the place where the cooling/heating devices do not affect the remote sensor.
• Choose the place where the outlet of the cooling fan do not affect the remote sensor.
• Choose the place where the remote sensor isn't affected when door is open.
NOTE
• For more information about installing Remote Temperature Sensor, Please refer installation
manual provided with Remote Temperature Sensor.
• For more settings about Remote Temperature Sensor, Please refer to chapter 'Installer
settings' (Configuration/Select room devices).
To Next Page
Loading...
Need help?
General