42
INSTALLATION OF OUTDOOR UNIT
1 Put the sling belt (delivered as accessory) through the unit's foot.
2 Carry the unit using the sling belts and the unit's handle (right), and put it onto the installation
structure.
3 Remove the sling belts and dispose them.
CAUTION
!
Be very careful while carrying the product.
• Do not have only one person carry product if it is more than 20 kg.
• PP bands are used to pack some products. Do not use them as a mean for transportation
because they are dangerous.
• Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your
hands.
• Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic
packaging bag may suffocate children to death.
• When carrying the unit, be sure to support it at four points.
Carrying in and lifting with 3-point support may make Outdoor Unit unstable, resulting in a fall.
• Use 2 belts of at least 8 m long.
• Place extra cloth or boards in the locations where the casing comes in contact with the sling
to prevent damage.
• Hoist the unit making sure it is being lifted at its center of gravity.
• Do not tilt product by more than the maximum angle of 45°.
To Next Page
Loading...
Need help?
General