Productivity 135
5. To adjust the following values, move each slide of the following:
GAIN: You can adjust the sensitivity of the sound recorded by the microphone. The higher
the GAIN value is set, the more sensitively the sound is recorded.
LCF: You can filter any low-pitched noises such as the low hum of the air conditioner. The
higher the LCF (Low Cut Filter) value is set, the better high-frequency noises are filtered.
LMT: It can prevent clipping of the recorded sound. The higher the LMT (Limiter) value is set,
the more low frequency sounds that will not get clipped.
6. Tap to record audio.
7. Tap to save the recorded file.
You can monitor sound quality with the connected earpiece while recording an audio. While
recording an audio in Studio mode, the sound monitoring is not supported. You can hear only
the background music.
To Next Page
Loading...
