Introduction 5
Water and Dust Resistant Properties
This product is water and dust resistant in compliance with the Ingress Protection rating IP68.
Your product has undergone testing in a controlled environment and is proven to be water and dust
resistant in certain circumstances (meets the requirements of classification IP68 as described by the
international standard IEC 60529 - Degrees of Protection provided by Enclosures [IP Code]; test
conditions: 15-35ºC/59-95ºF, 86-106kPa, 1.5 meters, for 30 minutes).
Note: Do not expose the device in conditions that are different from the test conditions. Results may vary
in actual use.
Warning: Despite a rating of IP68, your device is not impervious to conditions not tested in LG’s
controlled environment. Please note that any damages that occur due to such causes changes the color
of the LDI (Liquid Damage Indicator). If the color of LDI located inside the product changes, the product is
to be considered ineligible for any free-of-charge repair services provided under the product's limited
warranty. Avoid exposing the product to environments with excessive dust or moisture. Do not use the
product in the following environments:
● Do not immerse the product in any liquid chemicals (soap, etc.) other than water.
● Do not immerse the product in salt water, including seawater.
● Do not immerse the product in a hot spring.
To Next Page
Loading...
