Set Up Your Phone 10
Note: Do not use third party chargers with your device as they may not support fast charging and may
cause damage to your device.
Charge Using a PC Connection
Before using a PC connection to charge your phone, ensure that the computer is turned on. Depending
on the type of connection, your phone’s battery may not charge.
1. Insert the small end of the USB cable into the charger/accessory port at the bottom of your phone.
2. Insert the large end of the USB cable into an external USB port on your computer.
3. After charging, remove the USB cable from both the phone and the computer.
Warning: Make sure to use the USB cable provided; do not use third party USB cables or chargers with
your device. The LG limited warranty does not cover the use of third party accessories.
Warning: Failure to follow the instructions in this guide and improper use may damage the device.
Warning: Using the device when it is charging may cause electric shock. To use the device, stop
charging it.
Nano SIM Card
The Nano SIM card is an IC (Integrated Circuit) card containing phone number and other customer
information. Your phone’s SIM card is preinstalled and should only be accessed if directed by a customer
service representative.
Handling the Nano SIM Card
Keep the following in mind when handling a Nano SIM card.
● You are responsible for any damage caused by inserting the SIM card in another-brand IC card
reader, etc. Sprint is not responsible in such a case.
● Always keep the IC chip clean.
● Wipe clean with a dry, soft cloth.
● Avoid applying labels. May damage the Nano SIM card.
To Next Page
Loading...
