Global Services 89
1. Gently insert the ejection pin into the hole on the card tray and then pull out the ejected tray.
2. Place the Nano SIM card into the correct section of the tray.
Place gently with gold IC chip facing downward.
3. Insert the card tray back into the slot.
For more information, see Nano SIM Card.
Enable Global Roaming Mode
Your phone is designed to enter global roaming mode automatically when you activate your Sprint
Worldwide service, meaning that it should automatically connect to an appropriate CDMA/LTE network or
GSM/UMTS network when you travel. You may set global roaming options through the settings menu.
You may also need to set your network mode options through the settings menu. See Set the
Communications Method for Global Use.
Note: Global roaming is auto-enabled on your new Sprint phone. Visit sprint.com/globalroaming for more
information.
To Next Page
Loading...
