126
Entertainment
ISO : Controls the camera’s sensitivity to light. Choose from Auto,
400, 200 and 100.
White balance
:
Improves color qualities under different lighting
conditions. Choose from Auto, Incandescent, Sunny, Fluorescent, and
Cloudy.
Color effect : Applies artistic effects to pictures. Choose from
None, Mono, Sepia and Negative.
Timer
: Allows you to set a delay timer for the camera. This is ideal if
you want to be in the picture. Choose from Off, 3 sec, 5 sec, or 10 sec.
Shot mode
: Allows you to select the Shot mode for the picture.
Choose from Normal, Panorama, or Continuous shot.
Tag location
: Allows you to add location information to the
picture. This is ideal for geotagging purposes. Choose from Off or On.
Sutter sound
: Allows you to select the Shutter sound for the
Camera. Choose from Off Tone 1, Tone 2, Tone 3, or Tone 4.
Auto review
: Allows you to briefly view the picture after taking it.
Choose from Off, On, 2 sec, or 5 sec.
Storage
: Allows you to select where to store your pictures.
Choose from SD card or Internal memory.
Reset
: Allows you to reset to default value.
TIP
You can close all of the setting icons to give a clearer viewfinder screen. Just tap the
center of the viewfinder once. To recall the options, tap the screen again.
Using the focus mode
You can select from the following focus options:
Auto sets the camera to focus automatically on the object you tap on
the screen before tapping Capture
.
Face tracking sets the camera to automatically detect and focus on
human faces. When Face tracking is set, tapping the screen does not
activate the focus box.
To Next Page
Loading...
Need help?
General
