58
Connecting to Networks and Devices
USB Autorun
USB Autorun is a feature that allows your phone to connect to a PC using a
USB Cable and set it up on that PC without a physical CD-ROM.
Automatically installs the LG USB Modem driver.
Allows the phone to be used as mass storage when a microSD card is
present in the phone. It allows transfer of unprotected content from the
phone to the PC and vice versa.
NOTE
User content such as photos, videos, and voice recordings can be stored on a removable
microSD card that is inserted in your phone.
To select USB mode for Autorun
1. From the Home Screen, tap the Apps Key > Settings >
Connectivity > USB connection type.
2. Tap Mass storage to connect to the PC for Autorun.
Tap Charge only to use only the charging function and not the USB
function.
Tap Internet connection to use the ethernet function and not the default
USB function.
NOTES
ţ
USB Autorun only works with Windows
®
XP, Windows
®
Vista, and Windows
®
7
operating systems.
ţ
Log on to the PC as Administrator. Non-Administrator accounts have insufficient
privilege to install the USB Modem driver and don’t run the Autorun feature.
ţ
Do not unplug the USB Cable during Autorun.
ţ
If Autorun doesn't function properly
, unplug and plug the USB Cable to set Mass
storage mode.
Autorun automatically installs the USB device driver for every USB mode.
Internet connection mode
You can share your phone’s internet connection with your PC using a USB
Cable. After connecting with a USB Cable, set the USB connection mode to
Internet connection. Then select either Ethernet or Modem.
Ethernet: This mode changes the phone to USB tethering mode from
the PC. From the Home Screen, tap the Apps Key
> Settings >
To Next Page
Loading...
Need help?
General
