203
Safety
the government adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the body)
as required by the FCC for each model.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines.
The highest SAR value for this model phone when tested for use at the
ear is 1.14 W/kg and when worn on the body, as described in this user’s
manual, is 1.17 W/kg. While there may be differences between SAR levels
of various phones and at various positions, they all meet the government
requirement for safe exposure.
SAR information on this model phone is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/
after searching on FCC ID ZNFVS840.
To find information that pertains to a particular model phone, this site uses
the phone FCC ID number which is usually printed somewhere on the
case of the phone. Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID number for a particular
phone, follow the instructions on the website and it should provide values
for typical or maximum SAR for a particular phone.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications Industry Association (CTIA) website at
http://www.ctia.org/
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
To Next Page
Loading...
Need help?
General
