HDMI-TPS-RX110AY – User's Manual 63
7.7.6
Unmute Output
7.7.7
7.8.1
7.8.2
Change the DHCP State
7.8.3
7.8.4
Change the IP Address (Static)
7.8.5
7.8.6
Change the Subnet Mask (Static)
7.8.7
7.8.8
Change the Gateway Address (Static)
7.8.1
7.9.2
BAUD Rate Setting
7.9.3
Databit Setting
7.9.4
Stopbits Setting
7.9.5
Parity Setting
7.9.6
RS-232 Operation Mode
Sending Message via the Communication Ports
7.10.1
Sending Message via TCP Port
7.10.2
Sending Message via UDP Port
7.10.3
Sending Message via an RS-232 Port
7.11.1
Enable Command Injection Mode
7.11.2
Change Command Injection Port Number
7.11.3
Relay Port Settings
7.12.1
Set Relay Connection State
To Next Page
Loading...
Need help?
General
