Driving - Single Pedal Version
(optional equipment)
WARNING
Operators must be familiar with all safety procedures
that apply to forklift operation before driving.
Read and understand all safety information in Sec-
tion 2 before operating the truck.
NOTE
The truck will not travel unless the seat is oc-
cupied. If the seat becomes unoccupied while
the engine is running, the directional lever (1)
must be returned to the neutral position, then
to the desired drive direction again after the
seat is occupied, before the truck will move.
Start the engine.
Elevate the forks slightly and tilt the mast
back.
Ensure that the parking brake is released.
Forward Travel
Move the directional lever (1) forwards.
Verify that the forward direction symbol (4)
appears in the display.
NOTE
If the engine was started with a direction al-
ready selected, the directional lever must be
moved to neutral then to the desired drive di-
rection before the truck will move.
Carefully press drive pedal (3). Truck speed
depends on how far the pedal is pressed.
NOTE
Quick flooring of the accelerator pedal will
have no effect as the maximum acceleration
rate is controlled automatically.
If the pedal is released, the hydrostatic drive
system will automatically slow the truck.
1
1202 08072020-02
4
5
Display_1066
2 3
d12020034
4
Operation
Operation
156 Operating Instructions-1202 series LP 12028011590US-11/2022 - 04
To Next Page
Loading...
