Scheduled Maintenance
General Maintenance Information
This section contains all information required
to determine when the truck must be serviced
and what must be done. This information is
presented as scheduled maintenance charts
on the following pages. Be sure to perform
maintenance within the time limit given in the
maintenance charts. Proper and timely main-
tenance is essential to obtain the full operabili-
ty, performance and service life from the truck,
and is a prerequisite for any warranty claims.
Maintenance Intervals
Maintenance intervals are based on operating
hours but are also subject to the maximum
intervals (based on years in service) listed at
the top of each chart.
All lubrication and service intervals must be
reduced for dusty conditions, large tempera-
ture fluctuations or intensive use.
Scheduled Maintenance Charts
The scheduled maintenance charts provide
a list of maintenance tasks and associated
time intervals at which they must be carried
out. Tasks listed under successive intervals
are not cumulative; only the additional tasks
required are listed under successive intervals.
Use only high-quality lubricants or other mate-
rials meeting the specifications listed in Fluid
and Lubricant Specifications. All work must be
performed only by qualified forklift technicians.
Custom-fitted equipment is not covered by the
scheduled maintenance charts. If such equip-
ment is installed, refer to the manufacturer's
documentation for maintenance requirements.
Maintenance
5
Scheduled Maintenance
253Operating Instructions-1202 series LP 12028011590US-11/2022 - 04