Service Training
Section 2.6
Page 85
Batterie OK
*Linde Test Module**
** Version 2.94 **
** Device Ready **
* No Data received *
- Depress the ENTER button.
- The service interval indicator is reset and in the third line of the display there appears the operating
hours at which the service interval indicator will next be illuminated.
- Depress the DATEN NEU (new data) button.
- Enter menu number 31.
- The selected menu number will appear and also the current service interval setting (factory setting
is 250 hrs).
- The service hours at which the service interval indicator was last reset are shown in the second line
of the display.
31 250
XXXXXX
- After the battery test there will appear
31 250
XXXXXX
XXXXXX
* Data end *
2.6.11.1.2 RESETTING THE SERVICE INTERVAL INDICATOR WITH MENU FUNCTION 31
- Connect the diagnostic unit to the truck data connector. The data connector is located behind the
left switch cover at the instrument panel.
- Turn on the key switch.
- Depress the EIN (on) button. If the internal batteries are OK, the following message will appear on
the display
To Next Page
Loading...
