Linksys WRT 1900AC

9WRT 900AC | Setting Up: Basics
HOW TO CHANGE YOUR ROUTER’S LOCAL ACCESS
PASSWORD
Your router’s local access password was set when you ran the router’s setup
software, but you can change it at any time. You need the router password to
change router settings when you don’t have an Internet connection. When you
do have an Internet connection, log into your Linksys Smart Wi-Fi account by
following the directions under “How to connect to Linksys Smart Wi-Fi” on page .
To change your router’s local access password:
• LogintoLinksysSmartWi-Fi.(See“HowtoconnecttoLinksysSmartWi-Fi”on
page .)
• ClickConnectivity under Router Settings.
• Clickthe Basic tab.
• Under Router Password, type the new password, then click OK.
HOW TO CHANGE YOUR ROUTER’S TIME ZONE
Your router’s time zone should be set to your local time zone.
To set your router’s time zone:
• LogintoLinksysSmartWi-Fi.(See“HowtoconnecttoLinksysSmartWi-Fi”on
page .)
• ClickConnectivity under Router Settings.
• ClicktheBasictab,thenselectyourtimezoneintheTimeZonedrop-downlistand
click OK.