Lippert Components In-Wall Slide-Out User Manual

Rev: 06.14.2016
Page 3
IN-WALL® Slide-out Service Manual
Safety Information
Failure to act in accordance with the following may result in death, serious injury,
coach or property damage.
The IN-WALL® Slide-out System is intended for the sole purpose of extending and retracting the slide-out room. Its
function should not be used for any purpose or reason other than to actuate the slide-out room. To use the system
for any reason other than what it is designed for may result in death, serious injury or damage to the coach.
Before actuating the system, please keep these things in mind:
1. Parking locations should be clear of obstructions that may cause damage when the slide-out room is
actuated.
2. Be sure all persons are clear of the coach prior to the slide-out room actuation.
3. Keep hands and other body parts away from slide-out mechanisms during actuation.
4. To optimize slide-out actuation, park coach on solid and level ground.
Operation
Prior to Operation
1. Coach should be parked on the most level surface available.
2. Leveling or stabilizing system should be actuated to ensure coach will not move during operation of
slide-out system.
NOTE: In the case of a motorized unit, ignition MUST be off to operate the slide-out.
3. Be sure to keep all persons and pets clear of slide-out system during operation.
NOTE: Install transit bars (if so equipped) on the slide-out room during storage and transportation.
Always make sure that the slide-out room path is clear of people and objects before and during
operation of the slide-out. Always keep away from the gear racks when the room is being operated.

Lippert Components In-Wall Slide-Out Specifications

General

Brand	Lippert Components
Model	In-Wall Slide-Out
Category	Automobile Accessories
Language	English