LNS Quick Load Servo 65 - A24 - Safety Time for Top-Cut Positioning Elapsed

CHAPTER 1: ALARMS 1-14
A24 – Safety time for top-cut positioning elapsed
SAFETY TIME FOR
TOP-CUT POSITIONING
ELAPSED!
A24
Description:
The « safety time for top-cut positioning elapsed » alarm when the bar stock is in loading cycle for top cut,
if the top cut position is not reached within 5 minutes.
Solution:
Press the STOP button on the remote control to reset the alarm.
Restart the automatic cycle on bar feeder and lathe.
QUICK LOAD SERVO 65/80