CHAPTER 1: ALARMS 1-16
A26 – Clamping device closed prior to completing the feed out
CLAMPING DEVICE
CLOSED PRIOR
TO COMPLETING
THE FEED OUT!
A26
Description:
The « Clamping device closed prior to completing the feed out » alarm occurs whenever the clamping
device closing signal is detected before the value entered in parameter "overall part length feed out" has
been reached.
Solution:
Check that the clamping device is closing correctly.
Check that the signal "Clamping device closing" is correctly interfaced and programmed.
QUICK LOAD SERVO 65/80
To Next Page
Loading...
