4 Weighing - Overview
8
These functions are described seperately in this manual.
If you don’t press a key, the LR810 beeps and prompts you to take action. If
after a further delay, you do not press a key, the LR810 discards the just
measured weight and goes back to the Ready state.
Multiple Scales
If the multiple scale option is enabled in your LR810, you can measure
weights using Scale 1 or Scale 2.
Scale 1 and Scale 2 allow two different load bearing implements to be used
for lifting. For example, two different types of bucket/fork attachments.
The scale currently in use is displayed on the top line of the display.
To change the scale, see page 28.
To Next Page
Loading...
