10 Adding, Subtracting and Recalling
21
Recalling Last Weight
The recall function is a feature which recalls and displays the last weight
lifted. This allows you to correct mistakes in adding or subtracting weights
to the totals.
Recalling is equivalent to lifting the same weight again, but there are some
limitations.
You can only recall the last weight if it has been:
• Added
• Subtracted, or
• Timed out (ignored)
>
>>
>
To recall the previously lifted weight
1. Press RECALL.
The LR810 displays the previous weight and the TRIG light comes on.
2. While the TRIG light is on, you can:
• ADD (unless the previous action was an ADD)
• SUB (unless the previous action was a SUB)
• TARE
• Ignore (allow to time out).
To Next Page
Loading...
