11 Batch Weighing Mode
22
11 Batch Weighing Mode
Batch weighing allows you to add the weights of different products together
to obtain the total weight of a mix.
Batch weighing mode is an optional feature which can be enabled when the
LR810 is installed.
If it is available in your installation, you can switch batch mode on or off
from the MENU options (see page 29).
When batch mode is on, the functions of the weight displays change as
follows:
Top display
While the TRIG light is on, shows the lifted weight.
While the TRIG light is off, shows the short total for this product.
Bottom (large) display
While the TRIG light is on, shows the lifted weight.
While the TRIG light is off, shows the sum of the short totals for all
the products.
>
>>
>
To clear batch totals
In batch mode, the CLEAR key clears all short totals including the batch
total.
To Next Page
Loading...
