- 64
english
Operating additional equipment
Programming the timer with the timer overview
All programmed recordings, marked programs and copy orders are listed
in the timer overview. You can also program new recordings, mark other
programmes and copy pre-recorded programs from the DR archive to an
external recorder with the timer overview.
Call Timer list.
Red button: New entry (see right hand column).
Green button: Change recording.
Yellow button: Delete recording.
Blue button: Delete memo.
Explanation of the symbols in the timer list:
Record
Repeated recording (daily, weekly or Mon-Fri)
Serial recording
Decoding order (later decoding of an encrypted recorded
programme)
Marked programme (see page 34)
New entry: Programme timer recording manually
➠ Timer list is opened.
Red button: Call New timer entry.
Select Recording,
OK call.
Select Manual.
For programming a timer recording Via EPG or Via
Teletext see page 63.
OK Call Station selection.
Select station.
OK Call Timer data.
Entry of the timer data see page 63.
After confirming the timer data the new recording is
transferred to the timer overview.
New entry: Memorize programme using the timer overview
➠ Timer list is opened.
Red button: Call New timer entry.
Select Memo.
OK EPG is opened.
Note desired programme as described in Switching and
memorizing with the programme list (Seite 34).
New entry: Copying DR archive entries to DVD
➠ Timer list is opened.
➠ An external recorder is registered.
Red button: Call New timer entry.
Select Copy.
OK The DR archive is opened.
For further steps, see the chapter Digital Recorder
+
–
Copying recordings on page 87.
END
INFO
Timer list Mon 31.07./11:28
Tue 15.09. 06:00-07:50 DR Fußball live
Tue 22.09. 20:15-22:25 3sat wissen spezial
Delete recording
New entry
END
OK
INFO
Via teletextVia EPG
Recording wizard
Manual
END
OK
Recording
Memo Copy
New timer entry
END
OK
Memo
Recording
Copy
New timer entry
END
OK
To Next Page
Loading...
