logos biosystems LUNA-FX7 Basic - Bioprocess Feature; Bioprocess Tracking and Protocol Setup; Recording Bioprocess Data

21
6. Bioprocess Feature
Bioprocess Feature
The LUNA-FX7™ bioprocess feature enables automated tracking of multiple
bioprocessing activities. The bioprocess feature tracks individual batches according
to protocol and will calculate and chart growth rates, doubling times, and viabilities
based on count data.
Creating a bioprocess protocol
To create a new bioprocess, press PROTOCOL and create a new protocol. Edit and
save the new protocol as needed.
Record bioprocess data
1. To record bioprocess data, go to SETTINGS within a counting mode. Set
Counting chamber area is set to ‘Current’. If the Counting chamber area is not set
to ‘Current’, bioprocessing data will not be saved.
2. Press PROTOCOL and load the appropriate protocol.
When you record bioprocess data of the same cell, make sure that the same
protocol you have used is loaded before you count.
3. Press the COUNT button.
4. Press SAVE & PRINT.
5. Select either ‘Analyzed Image’ or ‘Raw Image’ AND select ‘Bioprocess’.