Need help?Do you have a question about the logos biosystems LUNA FX7 and is the answer not in the manual?
General| Dimensions | 26 cm (W) x 29 cm (D) x 23 cm (H) |
|---|---|
| Analysis Time | 35 seconds |
| Data Output | CSV, PDF |
| Weight | 7.5 kg |
| Counting Speed | 35 seconds |
| Connectivity | USB, Ethernet |
| Power Supply | 100-240 VAC, 50/60 Hz |
Legal statement regarding document contents and device usage.
Information on product and company trademarks.
Symbols indicating compliance with various regulatory standards.
Guidelines for safe operation and handling of the instrument.
General safety practices for using laboratory equipment.
Specifies environmental and power requirements for instrument operation.
Instructions for the proper disposal of the instrument.
Warning against disassembling the instrument.
Personal protective equipment and safety guidelines for users.
General advice and recommendations for safe instrument use.
Procedures for disposing of used consumables and waste.
Lists the items included in the LUNA-FX7™ package.
Overview of the automated cell counting device.
Description of compatible cell counting slide formats.
Guide for instrument setup and placement.
Initial configuration and connection steps.
Procedures for preparing cell samples for counting.
Methods for staining cells for brightfield and fluorescence counting.
Procedures for loading cell samples onto slides.
Steps for inserting and removing slides.
How to view captured cell images on the screen.
The process of counting cells using the instrument's interface.
Accessing and viewing recorded cell counting results.
Examining captured cell images from previous counts.
Re-processing raw images with different parameters.
Accessing a list of previously performed cell counts.
Choosing from available pre-set or custom protocols.
Overview of pre-set protocols for different counting modes.
Steps to create new custom counting protocols.
Modifying existing counting protocols.
Applying a saved protocol for cell counting.
Settings for brightfield counting modes.
Settings for fluorescence counting of cell lines and primary cells.
Advanced settings for fluorescence cell counting.
Adjusts the range of cell sizes recognized by the algorithm.
Controls sensitivity to background signals and weakly stained cells.
Adjusts detection of live cells based on membrane integrity.
Manages detection of background noise and weakly stained objects.
Used to accurately calculate cell concentrations.
Overview of tracking bioprocessing activities and charting data.
Steps to create new bioprocess protocols.
How to record and save bioprocess data.
Viewing charted results of bioprocess data.
Using QC to monitor instrument performance with validation slides.
Performing quality checks using validation slides.
Registering validation slides before use.
Executing QC runs and interpreting results.
Reviewing past Quality Control results.
Accessing and modifying instrument settings.
Configuring display and screen-related options.
Adjusting slide format and chamber selection for counting.
Options for slide format and chamber selection.
Configuring autofocus behavior for accurate imaging.
Configuring auto-save and report customization.
Connecting the instrument to a network via Ethernet or WiFi.
Enabling and configuring the CountWire system.
Setting the instrument's date, time, and power saver.
Managing software updates and instrument calibration.
Accessing instrument data from a PC over a network.
Procedures for powering on/off and cleaning the instrument.
Solutions for common issues like inaccurate cell counts.
Addressing problems like incorrect counts, slide issues, data transfer, and software errors.
Detailed specifications of the LUNA-FX7 instrument.
Specifications and types of compatible cell counting slides.
Catalog numbers for the LUNA-FX7 instrument.
Catalog numbers for counting slides and stains.
Ordering details for the CountWire system.
Ordering information for IQ/OQ protocols.
Catalog numbers for optional accessories like printers.
Terms and conditions for product use.
Warranty terms and conditions for the instrument.
Procedures for obtaining service after the warranty period.
To Next Page
