MAC Address
Available as a network address when you access the LUNA-FX7™.
- When using a Wi-Fi network with Mac address filtering
- When assigning a static IP
This setting is required to use the CountWire™ system.
Press COUNTWIRE.
CountWire
It must be ON to utilize the LUNA-FX7™ as a part of the CountWire™ system.
! Important ! If CountWire is on, data transfer via network by FTP does not work.
Instrument name
Required to distinguish the instruments in the CountWire™ system.
The default instrument name is the serial number, but the name may be changed.
Press Set default to initialize the instrument name to the serial number.
To Next Page
Loading...
