Operate the instrument in the conditions described in the Operating Conditions.
Install the instrument on a level and sturdy surface. Avoid vibrations from other devices.
Do not touch components with wet hands.
Use components provided or authorized by Logos Biosystems. If the proper combination of
components is not used, product safety cannot be guaranteed.
Use only the power cord and AC adapter provided by Logos Biosystems. If the proper power
cord and AC adapter are not used, electrical safety of the product cannot be guaranteed.
Ensure that the input voltage is compatible with the power supply voltage of the product.
Connect the grounding terminal of the instrument and electrical outlet properly. If the
instrument is not grounded, electrical safety of the product cannot be guaranteed.
Turn on the instrument only after connecting the power cord and AC adapter to both the power
source and the instrument. Turn off the instrument before disconnecting the power cord and/or
moving the instrument.
Disconnect the power cord in the case of abnormalities.
Be careful with possible electric shock hazards as electric current may be still alive when the
instrument stops.
Do not hold the slide slot while it is in motion.
Protect USB drives from being infected with viruses and malware.
Before shutting down or moving the device, remove the slides from the slide holder. If slides
are left inside the slide holder, they may fall into the internal parts of the equipment and cause
malfunctions.
To Next Page
Loading...
