2
CERTIFICATION MARKS
The WEEE (Waste Electrical and Electronic Equipment) symbol indicates that users of this
instrument have responsibility of returning and disposing of WEEE in an environmentally friendly
manner.
Follow the waste ordinances of your region for proper disposal provisions.
The CE mark indicates that this instrument conforms to all applicable European Community
provisions for which this marking is required. Users must be aware of and follow the conditions
described in this manual for operating the instrument. The protection provided by the instrument
may be impaired if the instrument is used in a manner not specified by this manual.
Protective earth (Ground)
This device complies with Part 15 of the FCC Rules.
This equipment complies with the requirement of UL 61010-1:2012, CAN/CSA C22.2 No.61010-
1:2012.
“Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part
1: General Requirements.”
The KC certification mark indicates that this instrument conforms with Korea’s product safety
requirements for electrical and electronic equipment and components for which this marking is
required.
To Next Page
Loading...
