The LUNA-FX7™ gives you the flexibility to use various counting slide formats. The
LUNA-FX7™ is compatible with the LUNA™ 1-, 3- , and 8-Channel Slide formats in
addition to the standard LUNA™ Cell Counting Slides and PhotonSlides™. With
single-time slide insertion, the LUNA-FX7
™
is able to count all slide chambers at
one time without needing to remove and reinsert a slide. The increased counting
volume yields more accurate and consistent results.
o Avoid vibrations from other devices.
o Do not install the instrument in a location that will expose the device to
intense ultraviolet light.
o Allow at least 5 cm (2 inches) free space at the back of the instrument to
prevent overheating of the instrument.
o Allow at least 10 cm (4 inches) free space at the right of the instrument to
insert/eject a cell counting slide easily.
Connect the instrument to electrical outlets using the supplied power cord and AC
adapter.
o Make sure the power cords are appropriate for your region.
o Always use power cord and AC adapter provided or approved by Logos
Biosystems. If appropriate cord is not used, the electrical safety of the
instrument cannot be guaranteed.
Connect the supplied WiFi dongle to a USB port.
(Optional) Connect a LUNA-FX™ Thermal Printer (P17001) to a USB port.
To Next Page
Loading...
Need help?
General
