logos biosystems LUNA-FX7 Basic - Brightfield Cell Counting Parameters

18
Load protocol
Select the desired protocol and press LOAD. The current active protocol name can
be seen in the upper right hand corner of the screen.
Protocol Parameters
Brightfield cell counting
parameters
Parameters for [Brightfield cell counting-Total cell counting]
Parameter
Range
DEFAULT*
Min. search size (μm)
1-89
7
Max. search size (μm)
2- 90
24
Cell detection sensitivity
1-10
5
Noise reduction
0-9
5
Dilution factor
1-100
1
Parameters for [Brightfield cell counting-Cell counting & Viability]