Appendix D
9-12
You must now reset the Loop-V 4200-9 When you do the firmware will switch from Bank 1 to Bank 2.
Press Z from the Controller Menu.
LOOP V4200-9 === Controller Menu === 16:41:22 08/18/2003
Serial Number: 10076 Connect_port: SUPV_PORT
Version : HW VER.D SW V3.08 05/28/2003
Start Time : 16:25:08 07/23/2003
[Port Status]
A B C D E F H J K
FE1 FE1 FE1 FE1 FE1 FE1 FE1 o o
[DISPLAY] [SETUP]
C -> Display System Configuration S -> System Setup
Q -> Alarm Queue Summary P -> Password Setup
I -> Information Summary M -> System Alarm Setup
L -> Firmware Download/Upload
T -> Configuration Download/Upload
V -> Store/Retrieve Configuration
[LOG] [MISC]
U -> Choose a Unit A -> Alarm Cut Off
F -> Log Off [SETUP],[MISC] Menu X -> Clear Alarm Queue
O -> Log On [SETUP],[MISC] Menu Y -> Controller Return to Default
Z -> Controller Reset
K -> Load All Ports Default
Reset - are you sure ? [Y/N]
If you are downloading via the Router Card Ethernet Port, you will have to set up the LAN-WAN Port System
first. The sample setup we used is shown below. Our Router Card was in Port H of the Loop-V 4200-9 and
we set LAN1 and LAN 2 to Ethernet. WAN 1 is set at HDLC.
NOTE:
If you are only using one Router Card in the Loop-V 4200-9 you do not need to enable any RIP
protocols. If you are using more than one Router Card and you want those cards to communicate
with each other then you must enable either RIP 1 for RIP 11 on the Port System (LAN1-WAN16)
Setup screen. Make sure all the Router cards you enable for this purpose are enabled to the same
RIP designation.
PORT H RTR === Port System(LAN1-WAN16) Setup === 11:11:00 04/09/2003
ARROW KEYS: CURSOR MOVE, Please Input: nnn.nnn.nnn.nnn, BACKSPACE to edit
NI IPAddress SubnetMask Frame RIP_I RIP_II Mode
LAN1 000.000.000.000 000.000.000.000 ETHERNET DISABLE DISABLE ROUTE
LAN2 192.168.100.100 255.255.255.000 ETHERNET DISABLE DISABLE ROUTE
WAN1 010.001.001.001 255.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN2 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN3 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN4 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN5 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN6 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN7 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN8 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN9 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN10 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN11 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN12 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN13 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN14 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN15 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
WAN16 000.000.000.000 000.000.000.000 HDLC DISABLE DISABLE ROUTE
<< Press ESC key to return to previous menu >>
To Next Page
Loading...