Appendix A
6-4
Press the space bar to view the rest of the time slots (Time slots 17-31).
Do not change anything under Port C.
Now, setup the backup mapping.
Move the cursor to the blank space under Column A.
Use TAB to select Port D.
Move the cursor to the right and change 00 to 01.
Move the cursor to the blank space under Column D.
Use TAB to select Port A.
Move the cursor to the right and change 00 to 01.
There is no need to map Port B, because that is taken care of by the backup feature.
The final map should look like this:
LOOP V4200-9 === System Setup ( MAP ) === 09:25:55 09/06/2000
ARROW KEYS: CURSOR MOVE, Please Input: 0~9, BACKSPACE to edit
PORT A PORT B PORT C PORT D PORT E PORT F PORT H PORT J PORT K PORT Z
TIME FE1 FE1 FE1 FE1 FE1 Inband
SLOT NONCAS NONCAS NONCAS NONCAS NONCAS
==== ======= ======= ======= ======= ======= ======= ======= ======= ======= ========
1 d D 01 d 00 d 00 d A 01 d C 01 d 00 d 00 d 00 d 00
2 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
3 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
4 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
5 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
6 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
7 d 00 d 00 d 00 d 00 d C 00 d 00 d 00 d 00 d 00
8 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
9 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
10 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
11 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
12 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
13 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
14 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
15 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
16 d 00 d 00 d 00 d 00 d C 01 d 00 d 00 d 00 d 00
<< ESC key to previous menu, SPACE key to another page >> PAGE1
Press ESC and save the configuration.
Finally, the new configurations should be stored so they will not be deleted upon a power reset.
Press ESC to return to the main menu.
Press “R” to activate the Store/Retrieve Configuration screen
LOOP V4200-9 === Controller Menu === 10:48:35 09/06/2000
Serial Number: 10001 Connect_port: SUPV_PORT
Version : HW H/W VER.E SW S3.Q4 05/24/2002
Start Time : 15:35:17 06/25/2002 PWR1: active PWR2: active
[Port Status]
A B C D E F H J K
o o o FE1 FT1 DTE MDSL MDSL MDSL
[DISPLAY] [SETUP]
C -> Display System Configuration S -> System Setup
Q -> Alarm Queue Summary P -> Password Setup
I -> Information Summary M -> System Alarm Setup
L -> Download/Upload Firmware
T -> Download/Upload Configuration
R -> Store/Retrieve Configuration
[LOG] [MISC]
U -> Choose a Unit A -> Alarm Cut Off
F -> Log Off [SETUP],[MISC] Menu X -> Clear Alarm Queue
O -> Log On [SETUP],[MISC] Menu Y -> Controller Return to Default
Z -> Controller Reset
K -> Load All Ports Default
>>SPACE key to refresh or enter a command ===>
To Next Page
Loading...