Appendix A
6-5
Move the cursor to “Store” and press ENTER.
LOOP V4200-9 === Store / Retrieve Configuration === 11:20:53 09/06/2000
>> Select ?
*STORE RETRIEVE
Press “Y” to store the configuration.
Enter the password for the system. The default password is “loop.”
When configuration is stored, press ESC, then ESC to return to the main menu.
This configuration has been tested as sound. If you have any questions, please feel free to contact your
Loop representative.
Note for Appendix A
Note:
Backup functions can be done for multiple pairs but they must be set up one pair at a time. If backing
up more than one pair do not use the multicast and broadcast functions.
This example shows a Loop 4200-9 equipped with both E1 and T1 cards. Port A is backed up by Port B,
Port C is backed up by Port D, Port E is backed up by Port F, and Port H is backed up by Port J. Ports A
and H are mapped to Port K.
TS 01-12
T1
T1
E1
E1
E1
E1
T1
T1
Port B
Port A
Port F
Port J
Port K
Port H
Port C
Port D
Port E
T1
TS 01-31
TS 01-31
TS 13-24
TS 01-12
TS 13-24
Primary
Backup
T1 A
T1B
To Next Page
Loading...