Menu Parameter Values Meaning
Automatic adjustment with reference solutions "CAL"
only with Input = cond)
**
Edit Manual adjustment to reference value
REF.S
Selection from standard reference solutions
REF.S: Selection from standard reference solutions for
automatic adjustment. Only with
1413 µS/cm Reference solution 00:01 M KCL
2760 µS/cm 0.02 M KCL
12.88 mS/cm 0.1 M KCL
50 mS/cm Sea water comparison solution KCL
111.8 mS/cm 1 M KCL
Unit t: Selection of the temperature unit
°C All temperatures specified in degrees
Celsius
°F All temperatures specified in degrees
Fahrenheit
Temperature compensation (not with INP = SAL and
TDS)
oFF Do not compensate for conductivity
measurement
nLF Non-linear function for natural water
according to EN 27888 (DIN 38404)
ground, surface or drinking water
NaCl Compensation for NaCl solutions (pure
and purest water)
Lin Linear temperature compensation
Compensation coefficient (only with t.Cor = Lin) (not
with INP = SAL and TDS)
0.300 - 3.000 Temperature compensation coefficient
in %/K.
Reference temperature of the temperature compensa-
tion (not with INP = SAL and TDS)
25 °C / 77 °F Reference temperature 25 °C / 77 °F
20 °C / 68 °F Reference temperature 20 °C / 68 °F
Comparison: Time interval for the calibration memory
(factory setting: OFF)
1 - 730 Time interval for calibration memory
(in days)
oFF No calibration memory
(**) If logger is running parameters marked with (**) cannot be called.
To Next Page
Loading...
Need help?
General
