LS Industrial Systems G3L-RUEA - A2.3 Slave System Flag

Appendix
A-9
A2.3 Slave System Flag
[Table A2.6] Slave System Flag
Key Word Contents
Start address
(Hexadecimal)
Data type Size Reference
_CPU_Type Remote CPU Type h0000 Word 2 Byte
_VER_NUM O/S Version Number h0002 Word 2 Byte
_SYS_STATE System status h0004 Word 2 Byte
_FSMTXECNT TX error count h0006 Word 2 Byte
_FSMRXECNT RX error count h0008 Word 2 Byte
_FSMSVCFCNT Service fail count h000A Word 2 Byte
_FSMScanMX Max. scan time h000C Word 2 Byte
_FSMScanAV Avg. scan time h000E Word 2 Byte
_FSMScanMI Min. scan time h0010 Word 2 Byte
_MOTHSTNO Master station number h0012 Word 2 Byte
_FSMVRCNT Variable RD count h0014 Word 2 Byte
_FSMVWCNT Variable WR count h0016 Word 2 Byte
_FSMHSTXCNT HS link TX count h0018 Word 2 Byte
_FSMHSRXCNT HS link RX count h001A Word 2 Byte
_AC_Fail_CNT Power Fail count h001C Word 2 Byte
_CNF_ER
d0 : _CPU_ER
d1 : IO_TYER
d2 : _IO_DEER
d3 : _FUSE_ER
d4 : _IO_RWER
d5 : _IP_IFER
d6 : _PWR_ERR
Typical flag
CPU H/W error
Module setting error
Module mounting error
Fuse cut error
I/O access error
I/P access error
SUB POWER error
h001E
Word
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
2 Byte
Byte information
(d7 ~ d15 are
reserved Byte)
_IO_TYER_N Module setting error h0020 Word 2 Byte
_IO_DEER_N Mounting error h0022 Word 2 Byte
_FUSE_ER_N Fuse error h0024 Word 2 Byte
_IO_RWER_N I/O error h0026 Word 2 Byte
_IP_IFER_N Special module error h0028 Word 2 Byte
_KGL_CNF
d0: local connection
d1: remote connection
KGL-WIN connection
status h002A Byte 1 Byte
_E_DATA_OPTION
Emergency data output
type
h002B Byte 1 Byte
0: output latch
1: user definition