Chapter 6. Communication Function
6-22
6.2.2 GMWIN remote connection
Remote connection between PLCs connected with Rnet I/F module can be estblished with remote 1.
By using the G3L-RREA, GOL-GWRA, remote connection between PLCs is available.
Remote 1 connection
: For remote 1 connection, GMWIN should be off-line status.
In this state, choose Project → Option… → Connect option menu from upper
menu of program, and choose Remote 1 in connection level, then following
screen will be displayed
Network type setting: Choose type according to network that remote 1 connection is made.
choose GLOFA Fnet/Rnet because remote 1 connection is connected with
Rnet.
Station no. setting: Specify station number of communication module mounted in PLC which
makes remote 1 connection. Station number is written on or in the case of
module.
Slot no. setting: Select slot number of communication module mounted in PLC of self station,
which makes remote 1 connection.
To Next Page
Loading...
