LS Industrial Systems G3L-RUEA - Structure and Configuration; Master Module Structure: G3 L-RUEA, G4 L-RUEA, G6 L-RUEA

Chapter 3. General Specification
3-2
This describes the structure and configuration for representative type of Rnet module.
3.2.1 Master module structure: G3L-RUEA, G4L-RUEA, G6L-RUEA
1) G3L-RUEA, G4L-RUEA
G3L-FUEA
RUN
LAS
TOKEN
TX/RX
FAULT
0:ON-LINE
MODE
×10
×1
CON2
CON1
T
yp
e name indicatin
g
section
Indicates type name of communication module
Station number setting switch
Sets station number in the range of 0~63 station (Use decimal).
LED indicatin
g
section
RUN
Indicates the status of CPU module and interface
LAS
Indicates that communication module is performing LAS function.
TOKEN
Indicates whether communication module has a token or not.
TX/RX
Indicates whether communication module is transmitting/ receiving or not.
FAULT
Flickers when the error that normal operation is not possible occurred in
ii dl
Mode setting switch
Sets operation mode of communication module
Communication connector
Connector for electric cable connection to connect communication module.
Note
1) Refer to the 3.2.6 for mode setting switch.
3.2 Structure and Configuration
Ex. of G3L-RUEA
G3L-RUEA