LS Industrial Systems G3L-RUEA - Terminal Resistance; Electric Network Terminal Resistance

Chapter 4. Transmission Specification
4-5
4.4 Terminal Resistance
4.4.1 Electric network terminal resistance
z Resistance value: 110 Ω, 1/2 W
no.6
no.7
9 pin Socket Type
Terminal
resistance
■ Terminal resistance(110Ω, 1/2W) of accessory parts(electric module only)
should be attached at the start and end of network.
■ Terminal resistance is attached inside of electric/optical converter(G0L-
FOEA) and repeater(G0L-FREA) which are installed at terminal of electric
network. Therefore, do not connect terminal resistance separately from
external.
■ Connector case should not be connected with terminal resistance.
(In case that case is metal.)