LS Industrial Systems G3L-RUEA - Rnet Mode Setting

Chapter 3. General Specification
3-10
2) Master station number setting
Sets station number of Rnet master module, which can transmit and receive high speed link data in
Rnet slave module (Station number switch is located inside of case).
Applied
Device type
Detailed drawing of
station number switch
Description
G3L-RREA
G4L-RREA
G6L-RREA
0
5
27
×10
0
5
27
×1
(1) Station number can be set from 0 to 63(Decimal).
(2) Station number setting
(Factory default is 0)
Switch Setting
X 10 Sets ten’s figure of station number
X 1 Sets one’s figure of station number
3.2.6 Rnet mode setting
1) Mode of master module
Applied
device type
Detailed drawing
of mode switch
Description
G3L-RUEA
0
5
27
0:ON LINE
MODE
G4L-RUEA
G6L-RUEA
Use mode 0 only.
.
Mode function
0 Executes the normal operation
1 2 ON
MODE
0:ON-LINE