Chapter 9. Trouble Shooting
9-4
9.2.2 Error code E00-02: Interface error
Interface error
This is the hardware error of
communication module or CPU. Contact
A/S center.
Is authorized power normal?
Is communication module
exactly mounted in main base?
Yes
Yes
No
No
Does
installation environment fit to
specification?
Check power/voltage.
Yes
Exactly mount communication
module into main base.
Change the condition of ambient
environment so as to be in the
range of general specification.
Has the connector pin of
communication module
any error?
Yes
No
Correct connector pin.
No
End
To Next Page
Loading...
