Chapter 6. Communication Function
6-26
6.2.3 KGL-WIN remote connection
All PLC (K1000S remote I/O and K300S/K200S connected by MK network can be connected by
KGL-WIN communication service. KGL-WIN remote connection supports up to 1. more than 1 is
impossible. Here describes remote 1 connection.
(1) Remote 1 connection: for remote 1 connection, KGL-WIN should be in off-line state. In this
state, select ‘Connection option’ at the ‘Project – Option’ menu.
Method of Connection: select ‘RS-232C’ and communication port of PC.
Depth of Connection: select ‘Remote 1’ and Fnet/Rnet type.
Slot no. setting: input slot number of communication module mounted in PLC of self station which
makes remote 1 connection.
Station no. setting: input station number of communication module mounted in PLC which makes
remote 1 connection. When using decimal number, input decimal number
without ‘h’.
To Next Page
Loading...
